AIThis post was created with the assistance of artificial intelligence (AI).

TL;DR

TikToker Jennifer Kilpatrick demonstrated a removable window cornice made from foam board, repurposed bedding and duct tape for her daughter’s apartment. The source estimates the basic materials cost about $25, though the figure may vary with fabric and mounting supplies.

TikToker Jennifer Kilpatrick showed how she made a removable, fabric-covered window cornice for her daughter’s apartment using foam board, repurposed bedding and duct tape, with the basic materials estimated at about $25. The project offers renters and students a way to cover window hardware and add a tailored look without buying a custom treatment or making a permanent installation.

Before you orderOffer from Amazon

Get home appliances delivered free with Prime

  • Fast, free delivery on millions of items
  • Prime Video, Amazon Music and more included
  • Member-only deals all year
Start your free Prime trial Free trial for eligible customers · Cancel anytime
As an affiliate, we earn on qualifying purchases.

Kilpatrick’s design is a lightweight, rigid box attached to the wall around the top and sides of a window. Hunker describes it as closer to a cornice board, also called a pelmet, than a conventional valance, which typically consists of fabric hanging across the top of a window. Both can conceal curtain rods or blind hardware.

The frame uses three foam-board pieces: one spanning the window area and two shorter side pieces that set the treatment’s depth. Hunker’s instructions suggest side pieces about 4 inches deep for thin blinds and at least 7 inches for thicker curtains. Kilpatrick connected the pieces with duct tape, then wrapped the frame in fabric, securing the material at the back with more tape and sewing pins.

For hanging, Kilpatrick demonstrated placing two Monkey Hooks in drywall, one on either side of the window, and pressing the foam frame onto them through small openings in the fabric. Command Strips hold the lower sides against the wall. Hunker recommends getting help with larger windows and using a level to check alignment. The source gives approximate prices of $15 for a six-pack of rigid insulation foam and $10 for a roll of duct tape; costs for fabric and other supplies can differ.

At a glance
reportWhen: The source describes the project and a…
The developmentJennifer Kilpatrick shared a low-cost, temporary DIY window cornice made from foam board and fabric, offering renters and students an alternative to custom window treatments.

A Temporary Fix for Window Hardware

The project is aimed at people who want a more finished window without paying for a custom cornice or making permanent changes to a rental or dorm room. Its low material cost is the main appeal in Hunker’s account, alongside the option to reuse bedding or choose discounted fabric.

It also provides a way to coordinate the top of a window with existing curtains. The structure can conceal a rod or blind hardware while leaving the window’s existing covering in place. However, the source’s approximate $25 total is a materials estimate, not a guaranteed price for every window or a tested comparison with every custom treatment.

Products Worth Considering

Apple MacBook Air 13-inch Laptop with M5 Chip, 16GB Memory, 512GB SSD, Liquid Retina Display, and 12MP Center Stage Camera (Midnight)

Apple MacBook Air 13-inch Laptop with M5 Chip, 16GB Memory, 512GB SSD, Liquid Retina Display, and 12MP Center Stage Camera (Midnight)

As an affiliate, we earn on qualifying purchases.

How the Foam Frame Works

Traditional fabric valances hang from a rod, while a cornice has a more structured shape. In Kilpatrick’s version, the foam boards form a shallow box, and fabric covers the frame so the finished piece has an upholstered appearance. The depth depends on what it needs to cover: Hunker suggests about 4 inches for thin blinds and at least 7 inches when covering thicker curtains.

The source says Kilpatrick used rigid insulation foam sold at Home Depot and black duct tape. Commenters suggested white tape to reduce the chance of dark tape showing through light fabric; Kilpatrick called her choice a “rookie mistake.” Hunker also suggests repurposed bedding, inexpensive curtain panels or upholstery remnants as fabric options, and batting beneath the fabric for a softer appearance.

““rookie mistake””

— Jennifer Kilpatrick, responding to comments, as quoted by Hunker

Costs and Mounting Depend on the Window

The source does not provide a dated price check, a complete itemized receipt or a cost comparison for different window sizes. Its about $25 estimate covers the basic materials described, but fabric, tools and mounting supplies may change the total. It also does not report how the installation performs over time, whether it can be removed without wall marks, or how securely it holds under different conditions.

The described method uses hooks inserted into drywall and adhesive strips. The source does not specify weight limits, wall condition requirements or whether other surfaces are suitable. The finished treatment’s weight and the placement of the hooks may affect whether the method works for a particular window.

Measure Before Cutting and Hanging

Anyone adapting the project would first measure the full width to cover, including at least the window molding on both sides, then choose the side-board depth based on the blinds or curtains behind it. The fabric should be cut with extra material along each edge so it can wrap around the frame and be secured at the back.

For installation, Kilpatrick’s follow-up demonstration shows using two hooks and Command Strips, with a helper for a larger frame and a level to check that the sides sit vertically. Hunker’s account does not identify a further update or a next public milestone for the project.

Key Questions

What did Jennifer Kilpatrick make?

She made a fabric-covered foam-board cornice for her daughter’s apartment. It is a rigid, box-like treatment designed to sit over window hardware.

How much does the DIY cost?

Hunker estimates the basic materials at about $25. The final cost can vary depending on the fabric and supplies already available.

How is the treatment hung?

Kilpatrick’s demonstration uses two Monkey Hooks placed in drywall and Command Strips to hold the lower sides. Hunker recommends help for larger windows and checking alignment with a level.

Can the project use fabric other than old bedding?

Yes. Hunker suggests inexpensive curtain panels or discounted upholstery remnants. Kilpatrick used repurposed bedding to keep the project budget-friendly.

Source: rss

You May Also Like

The ‘Performed Home’ Conundrum — How Much Are You Willing To Sacrifice For An Instagram-Worthy House?

A Livingetc essay examines how social media turns homes into public images—and whether design choices serve daily life or an online audience.

We’ve Used This Housekeeping Rule In My Family For 75 Years — It’s The Secret To Spotless Kitchen Drawers

A family’s 75-year-old housekeeping rule is credited with keeping kitchen drawers spotless, highlighting long-standing practical routines.

This Brand-New Illinois Farmhouse Was Designed To Look Hundreds Of Years Old

A 6,000-square-foot home in Momence, Illinois, was built to resemble an old farmhouse while restoring the property’s 19th-century barn and corn crib.

Where To Splurge (And Save) When Building A New House, According To Experts

Design experts advise prioritizing layouts, windows and durable exterior materials while delaying easier-to-change finishes and bonus-room upgrades.