Set up a smart space heater, connect it to its app, and configure its temperature and schedule for one room. This guide is for beginners who can use a smartphone and access their home Wi-Fi network. Allow 30–45 minutes, including time to check the heater’s placement and confirm that app controls work.
Get home appliances delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
FLANUR Smart Space Heater for Indoor Use – Large Room, 1500W
- ✔ Power: 1500 W
- ✔ Coverage claim: Up to 300 sq ft
- ✔ Form: 29-inch tower; 200 × 200 mm footprint
FLANUR 1500W Smart Space Heater – Black
- ✔ Power: 1500 W
- ✔ Coverage claim: 160–200 sq ft
- ✔ Voltage and current: 120 V; 12.5 A
Nutromo Space Heater with WiFi/App – Portable Electric Heater for Office
- ✔ Power: 1500 W
- ✔ Oscillation: 90°
- ✔ Heating method: Forced air
Difficulty: Beginner | Time: 30–45 minutes
What You’ll Need
Tools & Materials:
- Smart space heater with its power cord and user manual
- Smartphone or tablet with the heater manufacturer’s app installed
- Home Wi-Fi network name and password
- Clear, level floor space near a suitable wall outlet
Knowledge:
- Basic smartphone and app use
- Ability to connect a device to a home Wi-Fi network
Read the heater’s manual before plugging it in. Follow its requirements for clearance, outlet type, and room use. Keep the heater away from water and do not use an extension cord or power strip unless the manufacturer explicitly permits it. A smart plug does not make a heater safe to operate remotely unless the heater manufacturer approves that setup.
FLANUR Smart Space Heater for Indoor Use – Large Room, 1500W
This is the most complete match for buyers who want smart control to serve a whole-room heating routine. FLANUR says the 29-inch tower can warm spaces up to 300 square feet, and its 70-degree oscillation moves airflow across a wider area than a stationary heater. The listed 23 dB lowest-mode figure also gives it the clearest quiet-operation case in this group, although that number applies to the lowest mode rather than every setting.Compared with the compact FLANUR, this model prioritizes reach and tower form over a smaller footprint. Its listed footprint is 200 by 200 mm, but at 29 inches tall it may still feel imposing beside a desk or in a cramped corner. The Nutromo sweeps 90 degrees, wider than this model’s 70 degrees, and offers a fan mode; the FLANUR tower instead provides a specific coverage claim, timer, and low-noise specification. We would choose it when room reach and quieter low-speed use matter more than maximum oscillation.App, Alexa, and Google Assistant control can make temperature adjustments easier from across the room, while H1, H2, H3, ECO, and fan-only settings allow different operating preferences. The 12-hour timer is shorter than the compact FLANUR’s stated 24-hour auto shut-off, and the description calls the 24-hour shut-off optional. At 12.5 amps, it is also a substantial load for a household circuit. Its safety protections are useful, but buyers who want the most specifically itemized safety package may prefer the compact model, which explicitly lists dual fuses.
Pros:
- States coverage up to 300 square feet
- 23 dB minimum noise claim for its lowest mode
- App, Alexa, and Google Assistant control
- 70-degree oscillation, ECO setting, and 12-hour timer
Cons:
- 29-inch tower may be awkward in a small room
- 12.5-amp draw warrants checking circuit capacity
- Coverage and noise figures are product claims, not room-specific guarantees
Best for: People heating a larger living area who value app or voice control, oscillation, and a stated low-noise mode.
Not ideal for: People with very limited floor space, a circuit already carrying heavy loads, or a need for a compact heater with a clearly specified dual-fuse package.
Bottom line: We rank this first for its combination of stated larger-room coverage, smart controls, and a defined quiet mode, provided its tower size and power draw fit the room.
“We rank this first for its combination of stated larger-room coverage, smart controls, and a defined quiet mode, provided its tower size and power draw fit the room.”
FLANUR 1500W Smart Space Heater – Black
Where the larger FLANUR tower leads with room coverage, this black model makes its case through a more explicitly detailed safety and control package. It lists overheat shut-off, tip-over detection, child lock, dual fuses, and a 24-hour auto shut-off. That specificity is useful for households comparing protective features, though it does not replace following the placement and operating instructions supplied with the heater.The 1500-watt PTC ceramic element has high, low, ECO, and fan-only modes, while 70-degree oscillation spreads moving warmth around the room. Its stated 160-to-200-square-foot coverage is more modest than the tower FLANUR’s claim of up to 300 square feet, making this the more sensible pick for a smaller room. The stated noise level is 36 dB, above the other FLANUR’s 23 dB minimum, so buyers especially sensitive to sound may prefer the tower’s low setting. Nutromo sweeps more widely at 90 degrees, but does not provide a comparable noise figure or the same detailed safety list.Wi-Fi app, Alexa, and Google Assistant support offer convenient remote adjustments, but there is no physical remote included. That matters if we want a simple handheld control or do not want to rely on a phone or voice assistant. It also requires 2.4 GHz Wi-Fi. The manufacturer says not to use it on soft carpets or in bathrooms, which narrows placement options. For buyers whose room fits the stated coverage and who prioritize an itemized safety suite, these limitations may be manageable; for larger rooms, the tower is a clearer match.
Pros:
- Lists overheat shut-off, tip-over detection, child lock, and dual fuses
- Includes a stated 24-hour auto shut-off
- App, Alexa, and Google Assistant control
- High, low, ECO, and fan-only modes with 70-degree oscillation
Cons:
- No physical remote is included
- 36 dB stated noise level is higher than the tower FLANUR’s low-mode claim
- Requires 2.4 GHz Wi-Fi and is not recommended for soft carpets or bathrooms
Best for: Households seeking a 1500-watt smart heater for a smaller room with a specifically listed set of safety protections.
Not ideal for: Buyers who need a physical remote, want the lowest stated noise figure, or plan to place a heater on soft carpet or in a bathroom.
Bottom line: We recommend this FLANUR when its smaller stated coverage and placement guidance suit the room and a detailed safety feature list matters more than a remote or quieter low-speed claim.
“We recommend this FLANUR when its smaller stated coverage and placement guidance suit the room and a detailed safety feature list matters more than a remote or quieter low-speed claim.”
Nutromo Space Heater with WiFi/App – Portable Electric Heater for Office
Nutromo’s defining advantage is how broadly it moves air: its 90-degree oscillation exceeds the 70-degree sweep on both FLANUR models. That can suit an office or shared room where warmth needs to travel across a wider span, though oscillation alone does not establish how large an area the heater can effectively warm. Unlike the FLANUR tower, Nutromo provides no coverage figure or noise measurement here, so buyers have less basis for matching it to a particular room or comparing sound levels.It offers 1500-watt heating, Wi-Fi app control, Alexa and Google voice integration, and an ECO mode described as adjusting output. A built-in fan adds a cooling setting for warmer days. This gives Nutromo a broader seasonal role than either FLANUR, especially for someone who wants one tower appliance to handle both heat and airflow. The tradeoff is less operating detail: the supplied specifications do not state its voltage, current, timer, or safety protections. The compact FLANUR is stronger for buyers who want itemized safety features, while the tower FLANUR gives a clearer picture of claimed coverage and low-mode noise.Nutromo is therefore a feature-led choice for buyers who value wide sweep and fan versatility and are comfortable checking further operating details before purchase. Its tower form may still be bulky in a small office, and the description notes that higher fan speeds can be noticeably noisy. ECO mode may help adjust output, but the provided details do not quantify energy savings. We would favor it over the FLANUR options when the 90-degree movement and seasonal fan use are the main priorities, rather than when quiet operation or well-documented room coverage leads the decision.
Pros:
- 90-degree oscillation is the widest listed in this comparison
- Wi-Fi app, Alexa, and Google voice integration
- Heating and fan modes support use across seasons
- ECO mode is described as adjusting heat output
Cons:
- No coverage area or decibel figure is provided
- Higher fan speeds may be noticeably noisy
- Tower form may take too much space in a compact office
Best for: Office or living-room buyers who prioritize broad airflow, app and voice controls, and a fan mode for use beyond the heating season.
Not ideal for: People who need a stated room-coverage limit, a published noise figure, or clearly itemized safety and electrical specifications before choosing.
Bottom line: Nutromo is the better fit when wide oscillation and a cooling fan outweigh the FLANUR models’ more detailed coverage, noise, or safety specifications.
“Nutromo is the better fit when wide oscillation and a cooling fan outweigh the FLANUR models’ more detailed coverage, noise, or safety specifications.”
As an Amazon Associate we earn from qualifying purchases.
Before You Start
Choose a room where you can keep the heater in view while it runs. Check that the floor is dry and stable, and that the heater’s air intake and outlet will remain clear. Keep the heater away from curtains, bedding, furniture, clothing, and other combustible materials; use the clearance distances listed in its manual. Plug it directly into a wall outlet that matches the manual’s requirements. Do not place it where children, pets, or foot traffic could knock it over.
Some heaters require a 2.4 GHz Wi-Fi connection during setup. Check the manual or app instructions before pairing. Keep the heater’s physical controls accessible so you can switch it off even if the app or network is unavailable.
Step-by-Step Instructions
Step 1: Choose a safe location
Set the heater upright on a firm, level, dry floor. Measure or estimate the clearances listed in its manual, then move nearby curtains, furniture, paper, and other items outside that area. Keep the front outlet and rear or side air intake unobstructed. Place the heater where its cord can reach a suitable wall outlet without crossing a walkway or running under a rug.
Tip:Do not use the heater in a bathroom, damp room, or other wet area unless the manual specifically rates it for that location.
Check: The heater stands steadily, its vents are open, and the required clear space surrounds it.
Step 2: Inspect and plug in the heater
Check the cord, plug, housing, and controls for visible damage. If anything is cracked, frayed, or loose, do not use the heater. Otherwise, plug it directly into the wall outlet specified in the manual. Leave the heater switched off while you install or open its app.
Tip:Stop if the plug fits loosely, the outlet is damaged, or the cord or plug becomes unusually hot during use. Do not cover or pinch the cord.
Check: The heater powers on without an error indicator, unusual smell, or visible damage.
Step 3: Install the manufacturer’s app
Find the app named in the heater’s manual or setup label. Install it from your phone’s official app store, open it, and follow its prompts to create an account or sign in. Allow only the permissions required for setup, such as Bluetooth or local network access, when the app requests them.
Tip:Check the app’s publisher against the name in the manual. Avoid pairing through an unrelated app with a similar name.
Check: The app opens and displays an option to add or set up a device.
Step 4: Pair the heater with the app
Turn on the heater or place it in pairing mode as described in its manual. In the app, select the option to add a device and choose the heater model or matching device type. Follow the on-screen steps to connect it to your home Wi-Fi, entering the correct network password. Keep your phone near the heater until the app confirms setup.
Tip:If the app requests a 2.4 GHz network, connect your phone to that band during setup. A combined network name may require a router setting change; use the router maker’s instructions rather than guessing.
Check: The heater appears in the app as online or connected, and the app shows its current status.
Step 5: Set basic heating controls
Use the heater’s app or physical controls to select a low heat setting and set a moderate target temperature. If available, enable the built-in thermostat, tip-over protection, and overheat protection according to the manual. Learn how to switch the heater off in the app and at the unit before relying on remote controls.
Tip:Do not treat a thermostat or safety feature as a reason to leave the heater unattended or near combustible items.
Check: The display or app reflects the selected mode and target temperature, and the heater responds to a change made with its physical controls.
Step 6: Create a limited schedule
If you want scheduled heating, create a simple schedule for the times you expect to be in the room. Set it to turn off when the room is normally empty or before you go to sleep, unless the manual explicitly allows the planned use. Save the schedule, then check the displayed days and times, including the time zone and any weekday or weekend selections.
Tip:Start with a short schedule and verify it before adding more events. Remote start can switch on a heater when nobody is present, so only use it if the manufacturer supports that use and you can maintain the required clearances.
Check: The app shows the intended on and off times on the correct days.
Step 7: Test operation and shutdown
Stay in the room while the heater runs briefly. Confirm that warm air flows, the vents remain unobstructed, and the unit stays stable. Use the app to lower the target temperature or turn the heater off, then confirm that it stops heating. Test the physical power control as well. Do not test safety features by blocking vents, tipping the heater, or placing objects against it.
Tip:A mild odor may occur during first use if the manual describes it, but switch the heater off and follow the manual if you notice smoke, sparks, a burning-plastic smell, or unusual noise.
Check: The heater heats as expected and stops when commanded from the app and its physical control.
Common Mistakes to Avoid
- Placing the heater too close to curtains, furniture, bedding, or other items. — Use the clearance distances in the manual, keep the air intake and outlet open, and recheck the area before each use.
- Pairing the heater to the wrong Wi-Fi band or entering an incorrect password. — Check the network requirements in the manual, confirm the password, and keep the phone near the heater during pairing.
- Relying on a schedule or remote start without checking where the heater is placed. — Only schedule use when the location stays clear and the manufacturer permits it; set an off time and keep the physical control accessible.
Troubleshooting
Problem: The app cannot find the heater.
Solution: Confirm that the heater is powered and in pairing mode using the manual’s instructions. Move the phone closer, enable the requested Bluetooth or local network permission, and retry. If needed, restart setup using the manufacturer’s reset procedure.
Problem: The heater will not connect to Wi-Fi.
Solution: Recheck the network password and the heater’s Wi-Fi requirements. Connect the phone to the required band, move the heater or router closer during setup, and retry. Restart the router only if other devices also have connection trouble.
Problem: The app shows the heater as offline after setup.
Solution: Check that the heater has power and that your home network is working. Reopen the app and refresh its device list. If the heater’s physical controls work but it remains offline, follow the manual’s network reset steps or contact the manufacturer.
Problem: The heater does not produce heat or stops unexpectedly.
Solution: Check its selected mode, target temperature, timer, and any error indicator. Make sure the intake and outlet are clear and the unit is upright. Let it cool if an overheat protection indicator appears, then follow the manual. Stop using it if the problem returns.
What Success Looks Like
The heater is stable in a dry location with the manual’s clearances, plugged into a suitable wall outlet, and connected to the correct app and Wi-Fi network. The app shows the heater online, its controls and any saved schedule match your settings, and the unit heats and switches off when commanded. You know how to turn it off at the heater if the app or Wi-Fi stops working.
Next Steps
Before each use, check that the heater is upright, the cord and plug look undamaged, and the area around its vents remains clear. Review schedules after changing routines, clocks, or Wi-Fi settings. Switch the heater off and unplug it when the manual calls for it or when you need to move or clean it; let it cool first. For a damaged cord, repeated error, or persistent connectivity fault, stop using the heater and contact the manufacturer or a qualified service provider.
Frequently Asked Questions
Can I control a smart space heater when I am away from home?
Use remote control only if the manufacturer supports it and the heater’s placement and settings remain safe while you are away. Keep required clearances, use an off time, and do not leave the heater running unattended unless the manual expressly permits that use.
Does a smart space heater need 2.4 GHz Wi-Fi?
Some models do, especially during initial pairing. Check the manual or app setup instructions for the exact requirement. If pairing fails, confirm that your phone is connected to the supported band.
Can I plug a smart space heater into a smart plug?
Only do this if both the heater and smart plug manufacturers explicitly approve the arrangement and the plug’s electrical rating matches the heater. A smart plug does not replace the heater’s built-in controls or safety features.
What should I do if the heater smells unusual on first use?
Check the manual for guidance about odors during initial operation. Switch the heater off if you notice smoke, sparks, a burning-plastic smell, or an odor that persists, and contact the manufacturer before using it again.
