TL;DR
Get home appliances delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Bambu’s H3C teaser video depicts watch components printed in place using different nozzle and filament sizes, including a 0.2 mm nozzle and 2.85 mm filament. The imagery suggests mixed-nozzle printing may be supported, but Bambu has not confirmed the feature’s specifications, software requirements or availability on other printers.
Bambu has teased multi-nozzle and multi-filament printing for its upcoming H3C 3D printer, showing watch components made with different nozzle and filament sizes in a single in-place print. The video suggests users could combine fine-detail and larger-nozzle printing, as well as use 2.85 mm filament, but the company has not yet confirmed how the feature works or which printers will support it.
The teaser depicts three combinations for different parts of a watch: a 0.4 mm nozzle with 1.75 mm filament for a rigid case, a 0.2 mm nozzle with 1.75 mm filament for finer details, and a 0.4 mm nozzle with 2.85 mm filament for a soft strap. ToolGuyd interprets the strap material as possibly TPU, but the source report says that identification is uncertain; Bambu has not confirmed the material in the supplied information.
The video reportedly shows the watch components being printed in place as a single part. That presentation points to more than changing filament between separate jobs: it suggests the printer might assign different nozzle and filament combinations to components within one print. However, the footage is a product teaser, not a detailed specification, so the exact workflow and any limitations have not been established.
Bambu has not provided, in the material cited by ToolGuyd, a formal feature description, release date, price or explanation of the software needed. The report describes the H3C as upcoming and says the teaser follows an earlier promotion of its multi-color capability. The new image adds an indication of mixed nozzle and filament options, but it does not confirm that every configuration shown will be available to users at launch.
Finer Details, Fewer Print Compromises
If the teaser reflects a production feature, using different nozzle diameters in one print could let users reserve a smaller nozzle for detail while using a wider nozzle for larger areas. That could offer a way to balance detail and print efficiency without splitting a model into separate print jobs. The source material does not establish how much time or quality would change, so those benefits remain potential rather than measured results.
The apparent use of different filament diameters would also distinguish the H3C from workflows limited to one filament format. For users interested in flexible materials such as TPU, the possibility of 2.85 mm filament compatibility may broaden material choices. But neither the material itself nor the printer’s compatibility requirements are confirmed, and the teaser does not say what hardware changes or accessories would be needed.
Products Worth Considering
LG UltraGear 27-Inch QHD OLED Gaming Monitor, 240Hz, 0.03ms, G-SYNC Compatible, FreeSync Premium Pro, HDMI 2.1
Jackery Explorer 300 Portable Power Station, 292Wh
Bose QuietComfort Headphones (2nd Gen), Wireless Noise-Cancelling Over-Ear Headphones, Black
As an affiliate, we earn on qualifying purchases.
A Feature Users Have Requested
ToolGuyd places the teaser against requests from Bambu printer owners for mixed-nozzle printing. Its report says it has not seen Bambu allow users to combine 0.2 mm and 0.4 mm nozzles in the same print job on the company’s existing H2D and H2C machines, and speculates that the limitation may also apply to the more recent X2D. That is the outlet’s account of current capabilities, not a new statement from Bambu.
The report says software limitations have constrained mixed-nozzle use on Bambu’s existing dual-nozzle printers. The H3C teaser may indicate a different capability on the upcoming machine, but it does not explain whether that would result from hardware, software or both. ToolGuyd also mentions a P3C as a smaller-form-factor printer that had not been formally announced in the material it reviewed; any claim that it will share the H3C feature is speculation.
““0.4mm nozzle using 1.75mm filament for the rigid case””
— ToolGuyd
Feature Scope Still Undisclosed
Bambu has not confirmed whether the teaser depicts a feature that will ship with the H3C, how users would configure multiple nozzle sizes in a print, or which materials and filament diameters are supported. The source report also does not establish whether the pictured parts were produced in one continuous print process or whether additional steps are involved beyond what the video shows.
It is also unclear whether mixed-nozzle support will be limited to the H3C or become available on existing printers through a software update. ToolGuyd raises that possibility but does not cite a Bambu commitment. The possible P3C’s status and feature set are likewise unconfirmed in the report. No pricing, launch schedule or regional availability is provided.
Awaiting H3C Specifications
The next firm information would need to come from a Bambu product announcement or technical documentation explaining the H3C’s nozzle and filament options, software workflow, supported materials and release timing. Until then, the teaser supports describing mixed nozzle and filament use as an indicated capability, not a fully specified or independently demonstrated feature.
Users with existing Bambu machines will also need clarification on whether any comparable capability is planned for their models. The source material contains no update commitment or timetable, so support for H2D, H2C or X2D owners remains an open question.
Key Questions
What did Bambu show in the H3C teaser?
The teaser depicts watch components printed in place using a 0.2 mm nozzle and 0.4 mm nozzle, along with 1.75 mm and 2.85 mm filament. The feature details have not been formally confirmed in the source material.
It suggests that possibility by showing different nozzle sizes assigned to watch components, but Bambu has not provided a full technical description. The exact print workflow and limitations remain unknown.
Is the soft watch strap made from TPU?
The report describes the strap material as possibly TPU, not as confirmed. Bambu has not identified the material in the information supplied.
Will existing Bambu printers get the feature?
That has not been announced. ToolGuyd says mixed-nozzle printing is not currently available in the workflow it describes for existing models, but it cites no commitment to add the capability through a software update.
When will the H3C go on sale?
The source report provides no launch date, price or availability details. Those details remain pending a formal announcement.
Source: toolguyd.com
